Release Date：2023-04-07 10:49:34 Popularity：
Automatic packaging machines are prone to static electricity during the labeling process, and static electricity will more or less affect the labeling effect. We can improve this problem by appropriately increasing the humidity of the labeling site, and at the same time control the cleanliness inside the equipment, keep the labeling away from dust, and improve the labeling quality of the product. This can also prevent the phenomenon of warped labels during the labeling process and ensure the aesthetics of the labeling.
Most of the products have a lot of varnish on the surface, which will increase the difficulty of labeling, easily cause the contents to leak out, and the micropores in the tube wall will cause the label to lift. To solve this phenomenon, it can be pasted on the automatic packaging machine Control the labeling pressure of the label during the labeling process, or control the temperature during the labeling process. Among them, increasing the labeling temperature is not only beneficial to improve the price labeling effect of the automatic packaging machine, but also as the temperature increases, the activity of the substance inside the object will increase accordingly, which can make the label and the tube body better integrated.
From a structural point of view, the target plate and the rubber roller are only in contact with each other without any pressure. At this time, the size of the gap can be adjusted by adjusting the bearing seat on the lower part of the rubber roller. If necessary, the bearing on the upper part of the rubber roller should be adjusted.
The above content is an introduction to how to better operate the automatic packaging machine. With the improvement of people's living standards, the use and technology of the automatic packaging machine have been improved. The automatic packaging machine has stable performance and stronger functions. It is a new type of electronic mechanical product integrating automatic quantitative feeding, bag making and bagging. The body of the machine is designed with stainless steel. Complete quantitative blanking, bag making, filling, counting, sealing, cutting, output of finished products, labeling, printing, etc.